Pressure Gauges

Compact Capsule Gauges

Compact Capsule Gauges

Are having smaller capsule of beryllium copper. These gauges are ideal for measurement of very low pressure or vacuum normally Air or Gas which are not corrosive to copper alloy. Also recommended where gauges are subjected to mechanical vibration or pulsating pressure, Available in dial size 63, 100 and 150 mm with choice of mounting and connection M.S. case or cast aluminium weatherproof case. Accuracy of 63 mm ± 3% and 100 and 150 mm ± 2%, Standard pressure range in mmWC, mBar and inches of water column.

These gauges are suitable for Air, Oil, Gases and Liquids which are not corrosive to copper

Test Gauges

They are used in laboratories for testing and inspection of other gauges as well as for high accuracy measurement. Available with Accuracy ± 0.5% in Type 8. Each gauge is tested on a Dead Weight Tester and Test Certificate of Calibration is given alongwith each gauge, Available in dial size 150 and 250 mm, manufactured in all standard ranges in pressure or Vacuum in kg/em' and p.s.i.

They are used in laboratories for testing and inspection of other gauges as well as for high accuracy measurement

Test Gauges

They are used in laboratories for testing and inspection of other gauges as well as for high accuracy measurement. Available with Accuracy ± 0.25% I of F.S.D. in Type 9. Each gauge is tested on a Dead Weight Tester and Test Certificate of Calibration is given alongwith each gauge, Available in dial size 150 and 250 mm, manufactured in all standard ranges in pressure or Vacuum in kg/em' and p.s.i.

For control of pressure or for audible or visible alarms. Gauges are provided with single, double or triple contacts adjustable throughout the range with different mode of switching action.

Contact Gauges

For control of pressure or for audible or visible alarms. Gauges are provided with single, double or triple contacts adjustable throughout the range with different mode of switching action. Choice of low action normal contact, snap action magnetic contact or Inductive contact, Available in Dial size 100.mm and 150 mm and in all standard ranges.

Potentiometric Transmitter is mounted directly on the dial and pointer of the potentiometer is coupled to the instrumentl pointer.

Transmitter Type Pressure Gauges

Potentiometric Transmitter is mounted directly on the dial and pointer of the potentiometer is coupled to the instrumentl pointer. The pressure gauge gives signal of change in resistance value as the pointer deflects. The standard range of Change in I Resistance is 100 Ohms for full scale pointer deflection. Also available potentiometer transmitter with output 4 to 20 or 0 to 20 milliamps. These gauges are available in dial size 150 mm and in all standard ranges.

The measuring system consisting of 2 bourdon tubes, one for high and one for low pressure line and the pointer of the instrument gives direct reading off differential pressure.

Differential Pressure Gauges

The measuring system consisting of 2 bourdon tubes, one for high and one for low pressure line and the pointer of the instrument gives direct reading off differential pressure. Each bourdon tube can take maximum pressure of 1.3 times the maximum range shown on the dial. Manufactured in dial size 150 mm and with pressure range from 0-1 kg/cm2 upto 1000 kg/ and with Accuracy ± 1%.